Emissions And Immunity Information; Electromagnetic Emissions - B.O.L.T BT4 User Manual

B.O.L.T User Manual

21. Emissions and immunity information

21.1 Electromagnetic emissions

Complies with IEC 60601-1-2:2015
Table 1 - Guidance and manufacturer's declaration – electromagnetic emissions – for
all medical electrical equipment and medical electrical systems
Guidance and manufacturer's declaration – electromagnetic emissions
The B.O.L.T device is intended for use in the electromagnetic environment specified below. The
customer or the user of the B.O.L.T device should assure that it is used in such an environment.
Emissions test
RF emissions
EN 55011
RF emissions
EN 55011
Harmonic emissions
EN 61000-3-2
Voltage fluctuations
emissions
EN 61000-3-3
© Copyright 2019, All Rights Reserved. AmZetta Technologies Private Ltd.
Compliance
Group 1
Class B
Complies
/ flicker
Complies
Electromagnetic environment –
guidance
The B.O.L.T device uses RF energy
only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.
The B.O.L.T device is suitable for
use in all establishments other
than domestic and those directly
connected to the public low-
voltage power supply network
that supplies buildings used for
domestic purposes.
47