Care And Maintenance - B.O.L.T BT4 User Manual

B.O.L.T User Manual
special precautions regarding EMC, and all equipment must be installed and put into
service according to the EMC information specified in this manual.

5.4 Care and Maintenance

 Store the device and the accessories in a clean and safe location.
 User is highly recommended to follow the instructions provided in this user manual
for safe operation.
 Changes or modifications not approved by the manufacturer will void the user
warranty.
 Keep the accessories and device away from rain, sweat, and water.
 Avoid operating the B.O.L.T device in dusty and unstable temperature environments.
 Use the B.O.L.T device in the environment as described in this user manual.
Otherwise, you will compromise the device's performance and reduce its lifetime.
 Do not disassemble, repair, or modify the device by yourself, as this could affect the
safety, and voids the warranty of the device.
 The B.O.L.T device and accessories are non-sterile. Use a soft cloth to clean the
B.O.L.T device. Do not use any abrasive or volatile cleaners. If necessary, you may
wipe the cuff with a soft, damp cloth.
 Clean the rubber touching the finger inside the SpO2 probe gently by a soft cloth
dampened with 70% isopropyl alcohol before measurement.
 Clean the IRT sensor window with a soft cloth dampened with 70% isopropyl alcohol
before measurement.
 Unexpected mechanical damage of the device must be intimated to the manufacturer
immediately.
 Do not service or perform maintenance procedure while in use with patients.
 Servicing and troubleshooting procedures on the software or hardware components
may only be performed by authorized service centers.
 Any firmware/software update to B.O.L.T device has to be done through an
authorized service center of Amzetta Technologies Pvt Ltd. The B.O.L.T application will
prompt the user, when updates are required.
 For service or consumables contact Toll-free number (India): 1800–572–4061, (US)
1833-222-5444 or email to support@amzbolt.com
The service life of the B.O.L.T device, IRT & SpO2 are 5 years.
The service life of the Cuff & dust cover are 3 years.
© Copyright 2019, All Rights Reserved. AmZetta Technologies Private Ltd.
16