B.O.L.T BT4 User Manual page 42

Body life tracker, one-touch wireless health tracker
Table of Contents

Advertisement

B.O.L.T User Manual
Bluetooth Wireless Technology Information:
Bluetooth Compliance: Version 4.1 Dual mode BR/EDR/low energy
Operating Frequency: 2.4 to 2.480 GHz
Output Power: TX: 4.4 dBm / -3.79 dBm
Operating Range: 10 meter radius (line of sight)
Operation: Slave
Antenna Type: Integrated chip type antenna
Radio Protocol Bluetooth: (BDR+EDR) / BLE
Modulation Type: Gaussian frequency shift modulation /Frequency Hopping Spread Spectrum
Data Rate: 1 Mbit/second
Data Latency: 6 ms
Data Integrity: Adaptive Frequency Hopping, 24-bit CRC (cyclic redundancy check), 32-bit
message integrity check
Data Format: Sends data packets once per second. Includes a second counter that allows the
host to detect if packets are missing and the device to retransmit.
Quality of Service: This device uses fully qualified Bluetooth V4.1 specification with Bluetooth
Smart ready technology for wireless communications, which allows for reliable
communications in electrically noisy environments, and transmits physiological data once per
second. If data is lost, the device will transmit data again one second later. If the connection
is lost, the BOLT application - Bluetooth symbol will change from Blue to Grey and become
available for a connection in a few seconds.
Authentication and Encryption: Supported
Encryption Key Size: 128 bits AES (advanced encryption standard)
The Bluetooth® word mark and logo are registered trademarks owned by Bluetooth SIG, Inc.
Bluetooth Security: The Bluetooth radio contained in the Base unit is a Bluetooth Smart
single-mode, low-energy radio. Generic Attribute Profile (GATT) and SPP profiles are
implemented for devices to connect through BLE or Bluetooth 4.1+. BOLT device supports a
single Bluetooth connection at any point in time. Apart from the standard Bluetooth security
measures, Amzetta has implemented a proprietary protocol in the BOLT device that can be
parsed only by those devices running BOLT application.
Specifications of Pulse oximeter:
Oxygen Saturation Display Range: 70% to 100% SpO2
Pulse Rate Display Range: 30 to 250 beats per minute (BPM)
Declared Accuracy*: The table below shows Arms values measured using the device model
VA01 along with VA01-2 in a clinical study.
42
© Copyright 2019, All Rights Reserved. AmZetta Technologies Private Ltd.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Va01Va01-0Va01-1Va01-2

Table of Contents