B.O.L.T BT4 User Manual page 12

B.O.L.T User Manual
therapy or arterio-venous shunt or people who received a mastectomy. Consult your
doctor prior to using the device if you suffer from any of these illnesses or conditions.
 Retake the reading when the application displays unexpected errors/readings by
following the mandatory instructions given in the corresponding measurement
sections.
 Regularly check that the operation of the B.O.L.T device does not result in the
prolonged impairment of patient blood circulation.
 Do not use the B.O.L.T device to monitor the user who is operated with HF surgical
equipment.
 Clean the device and accessories with a soft cloth dampened with 70% isopropyl
alcohol before taking a measurement from one user to another to avoid cross-
contamination.
 The B.O.L.T device should not be used adjacent to or stacked with other equipment,
and that if adjacent or stacked use is necessary, the device should be observed to
verify normal operation in the configuration in which it will be used.
 Pressurization of the cuff due to simultaneous use of the cuff on the same limb can
temporarily cause loss of the function.
 The B.O.L.T device is designed for adults and not recommended for the neonates,
pediatrics, and infants.
 The user is recommended to insert the given USB plug in the USB port of the base
unit during battery mode operation.
Removing USB Plug
 The user can remove the USB Plug while charging the device.
© Copyright 2019, All Rights Reserved. AmZetta Technologies Private Ltd.
Inserting USB Plug Zoomed View
Zoomed View
12