Installing Propane Containers - venture SPORT TREK Owner's Manual

you need not be concerned regarding this procedure unless you permit
the valve to be in OPEN position when empty.
When refilling propane containers, they are generally removed from
propane compartment or tie downs. BE SURE (a) to reinstall correctly,
as you removed these components and (b) test for leaks.
When propane containers are filled to 80% level there is available space
for safe expansion of the vaporized liquid. Should your container become
slightly overfilled, pressure may rise due to hot sun. It could cause the
overflow valve to "blow off" and emit a small quantity of propane vapor.
This can be detected by a strong odor around tanks. Keep open flames
away from area. It is best to remove bottle, take to a safe area and burn-
off the excess pressure by using a torch for several minutes.
When disconnecting propane containers, you must turn the ACME fitting
in a clockwise direction because left-hand threads are utilized. When
reconnecting, turn connections counterclockwise. Connections must be
tight, however DO NOT over-tighten.
A warning label has been located near the propane container.
This label reads as follows:
DO NOT FILL CONTAINER(S) TO MORE THAN 80% OF
CAPACITY.

Installing Propane Containers

VENTURE RV are equipped with 20 or 30 pound propane containers,
depending on model.
1. Overfilling the propane container can result in
uncontrolled gas flow, which can cause fire or
explosion.
2. A properly filled container will contain
approximately 80% of its volume as propane.
Never smoke during the filling of propane tanks. Keep the
recreational vehicle away from immediate filling area when
possible and extinguish all gas pilots.
Propane cylinders must not be placed or stored inside the
vehicle. Propane cylinders are equipped with safety devices
that relieve the excess pressure by discharging gas into the
FAILURE TO COMPLY COULD RESULT IN DEATH OR
atmosphere.
SERIOUS INJURY.
54