Advertisement
Back to Thermal Menu
14. Tighten the lockdown cap into the top of the furnace lift shaft. This will
immobilize the furnace.
15. If this is a 2940, turn off the power switch. If this is a Q400, go to the next step.
16. On the Q400 display panel, press the "Display Menu" button.
17. Press the "Shutdown" button. Wait for the display screen to show that the
instrument is shutdown and it is safe to turn off the instrument.
18. Turn off the power switch located on the back of the instrument near the power
cord.
2940:
19. Remove the instrument feet and place the instrument on the shipping plywood.
20. Secure the instrument to the plywood with the long ¼-20 bolts provided.
21. Place the board with the instrument attached into the shipping box.
22. Place the inner sleeve inside the box.
23. Seal box and place the green return label on the outside of the box.
Q400:
24. Bolt the Q400 down on the shipping pallet. Place the cardboard box over the
pallet.
25. Strap the cardboard box down over the pallet and instrument.
26. Seal the box and place the green return label on the top of the box.
Ehc
TMA 2940/Q400 Packup instructions
Back to Thermal Menu
7 of 7
Back to Top
Advertisement
