HTC Athena Service Manual page 48

Table of Contents

Advertisement

Doc. Title
HTC CONFIDENTIAL
宏達國際電子股份有限公司
High Tech Computer, Corp.
.
Athena Service Manual
Doc. No.
Issued Date
Revised Date
Page
1. Open the battery cover before assembly
the Bottom Cover into unit.
2. Then tighten three screws.
3. The Bottom Cover has magnets, be
careful to tighten the screws.
SCREW: 72H01853-00M (Q'TY: 3).
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 0.6 ± 0.05KGF-CM
Take one camera Poron. Stick it into antenna
as shown as figure.
Stick spacer mylar to upper frame of antenna
cover.
1. Assembly antenna cover to main units.
First to hold the camera button site to unit.
Then assembly the volume slider side to
unit.
[NOTE]
Be careful to assembly and adjust the
Volume Slider button to unit. Ensure to
hold the switch of M/B and don't break it.
REV.
DOC-00026040
2007/2/15
A02
48 of 102

Advertisement

Table of Contents
loading

Table of Contents