HTC Athena Service Manual page 33

Doc. Title
Use plastic stick to separate the LCM and frame. Then take out the LCM. Remove the LCM
mylar by tweezers and separate them. Take out LCD.
HTC CONFIDENTIAL
宏達國際電子股份有限公司
High Tech Computer, Corp.
.
Athena Service Manual
Doc. No.
Issued Date
Revised Date
Page
Separate main unit and Metal Bezel.
1. Use tweezers to take out the Conductive
Fabric from UMTS board.
2. Remove 1 screw on Lower Frame.
SCREW: 72H00338-00M (Q'TY: 1).
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 0.8 ± 0.05KGF-CM
REV.
DOC-00026040
2007/2/15
A02
33 of 102