HTC Athena Service Manual page 32

Doc. Title
HTC CONFIDENTIAL
宏達國際電子股份有限公司
High Tech Computer, Corp.
.
Athena Service Manual
Doc. No.
Issued Date
Revised Date
Page
Remove three Screws from the bottom cover
and take out bottom cover by plastic stick.
[NOTE]
Be careful to take out the bottom cover and
avoid deforming.
SCREW: 72H01853-00M (Q'TY: 3).
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 0.6 ± 0.05KGF-CM
Use tweezers to take out the gasket.
Use tweezers to hook two fillers and take it out
from main unit.
1. Remove three screws from the antenna.
2. Separate the antenna from upper frame by
plastic stick, take out the antenna.
SCREW: 72H00339-00M (Q'TY: 3).
[NOTE]
PLEASE SET UP THE TORQUE OF ELECTRICAL SCREW
DRIVER TO 1.2 ± 0.05KGF-CM
REV.
DOC-00026040
2007/2/15
A02
32 of 102