Table of Contents
Advertisement
Doc. Title
C
12 – B
HAPTER
1.
Tool Requirement: Battery Rundown Software.
2.
Before performing battery rundown test, please measure and examine the Unit/MB Board whether it is normal or
not by leakage current measurement.
3.
Please check whether it's the former battery or not.
Test Criteria
A.
Please charge your unit to full capacity for battery before doing the test.
B.
Please turn off GSM, Bluetooth, WLAN, or others function before testing.
C.
Please run the Rundown tool for an hour.
D.
After one hour testing, the result of capacity should bigger than 72%.
E.
If the test result is lower than the Criteria, should exchange the battery for customers in Warranty.
Step 1: It is required to save
via ActiveSync or copy by Mini-SD card.
Step 2: Adjust the power management setting before using rundown test program.
HTC CONFIDENTIAL
宏達國際電子股份有限公司
High Tech Computer, Corp.
.
Athena Service Manual
ATTERY RUNDOWN TEST PROCEDURE
PowerDetect.exe、model.txt、SetBackLight.dll
testing；model.txt
executive program.
backlight of PDA, and it will be hidden while using file explorer.
PowerDetect.exe
is the main executive program for battery
is the related parameter setting for the main
SetBackLight.dll
Doc. No.
DOC-00026040
Issued Date
2007/2/15
Revised Date
Page
100 of 102
in the same folder under WinCE
is used to control the
REV.
A02
Advertisement
Table of Contents
