Advertisement
Quick Links
Adult Malibu - 4 Drawer 3 Door Robe
Assembly Instructions -
More help is available throughout this booklet by scanning
Dimensions
Width - 110.4cm
Depth - 49.8cm
Height - 180.5cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Please keep for future reference
in the QR codes or typing in the links
532/8038
563/6307
544/3985
563/7038
544/3930
564/9581
548/2458
565/5429
542/1639
558/2255
MADE IN
BRITAIN
Issue 1 - 02/06/16
Advertisement
Related Manuals for Argos Adult Malibu 532/8038
Summary of Contents for Argos Adult Malibu 532/8038
- Page 1 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 83kgs. space to layout the parts before recommend the Please lift with care. starting.
- Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 4 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 5 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Drawer Fittings Bag marked ‘drw kit’...
- Page 6 Components - Fittings Individual Fittings Bags Overbalance protector kit ( F474) Handle (F418) Pre-mounted hinge ( F419) 436mm long Drawer Brace (F427) CL Runner (F608) 450mm long CR Runner (F609) DL Runner (F610) DR Runner (F611) Tools required Eye protection (when using a Rule Spirit...
- Page 7 Assembly Instructions Step 1 Use the Drawer Fittings Bag marked ‘drw kit’ for Steps 1 - 7 Prepare the 4 pair of Standard Drawer Box Assembly drawer sides https://www.youtube.com/watch?v=HclfJdkm-Lg Insert a large locking cam nut into the 4 left drawer sides and the 4 right drawer sides Note: The arrow on the...
- Page 8 Assembly Instructions Step 3 Fit the drawer bases Slide a drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 4 Fit the drawer backs Fit a drawer back between the drawer sides Make sure that the drawer base...
- Page 9 Assembly Instructions Step 6 Fit the drawer braces Turn the 4 drawer assemblies over and hook a drawer brace onto the bottom edge of the drawer back Fix it to the drawer front and drawer back using 2 Important: Make sure screws that the drawer assembly is square before fitting...
- Page 10 Assembly Instructions Step 8 Use the Main Fittings Bag for Steps 8 - end Prepare the divider Fit a rail holder to the divider using 2 screws Insert 2 large locking cam nuts into the divider Push 2 of the quickfit dowels as far as they will go into the divider...
- Page 11 Assembly Instructions Step 10 Fit the base Push the horizontal onto the divider fit it using 2 screws Finished front edge Note: To make the assembly easier, place Polystyrene polystyrene blocks from block the packaging underneath the panels to raise the assembly.
- Page 12 Assembly Instructions Step 13 Fixing Bottom Mounter Runners https://www.youtube.com/watch?v=Z6lGMy19h7Q Prepare the drawer divider screw Fit 2 CL runners to the drawer divider The 1st screw uses the 1st hole in from the front of the runner. Finished Finished The 2nd and 3rd screws front edge front edge use the holes that line...
- Page 13 Assembly Instructions Step 14 Fit the drawer divider Push the drawer divider onto the horizontal Turn the 2 large locking cam nuts fitted to the drawer divider clockwise as far as they will go to secure the panels. Important: Make Finished sure there is no gap front edge...
- Page 14 Assembly Instructions Step 17 Prepare the right side screw Fit 2 CR runners to the right side The 1st screw uses the 1st hole in from the front of the runner. The 2nd and 3rd screws use the holes that line Finished up with the other panel front edge...
- Page 15 Assembly Instructions Step 19 Finished front edge Fit the small top rail to the right side Push the small top rail down onto the right side Finished front edge Step 20 Fit the right side Push the right side onto the horizontal Make sure that the small top rail is pushed...
- Page 16 Assembly Instructions Step 22 Fit the back cross rail Push the back cross rail onto the right side Turn the large locking cam nut fitted to the back cross rail clockwise as far as it will go to secure the panels. Important: Make sure there is no gap between...
- Page 17 Assembly Instructions Step 25 Prepare the plinth Insert 2 large locking cam nuts into the plinth Push 2 of the quickfit dowels as far as they will go into the plinth Tap 2 wooden dowels into the plinth Step 26 Fit the plinth Push the plinth onto...
- Page 18 Assembly Instructions Step 28 Prepare the left side screw Fit 2 CL runners to the left side The 1st screw uses the 1st hole in from the Finished front edge front of the runner. The 2nd and 3rd screws use the holes that line up with the other panel holes.
- Page 19 Assembly Instructions Step 29 Fit the back rail Push the back rail onto the divider Turn the large locking cam nut fitted to the back rail clockwise as far as it will go to secure the panels. Important: Make sure there is no gap between Note: Support the the fitted panels.
- Page 20 Assembly Instructions Step 31 Fit the top Push the top onto the assembly. Turn the 6 large locking cam nuts clockwise as far as it will go to secure the panels. Important: Make sure there is no gap between the fitted panels. Step 32 Fit the 6 plastic nails Tap 2 plastic nails...
- Page 21 Assembly Instructions Step 33 Squaring up a Robe and tting the Back Panel www.youtube.com/watch?v=udEKmXmPEW0 Fit the back panels The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Square up the unit by Note: Do not making sure that...
- Page 22 Assembly Instructions Fixing Bottom Mounter Runners Step 35 https://www.youtube.com/watch?v=Z6lGMy19h7Q Fit the hanging rail and the drawers Push the hanging rail into the rail holders Slide the wheels of the runners fitted to the drawers, over the wheels of the runners fitted to the side panels and push the drawers into position.
- Page 23 Assembly Instructions Step 37 Fit the shelves Lower the 3 loose shelves down onto the shelf studs Pre-mounted Hinge Fitting & Adjustment Step 38 https://www.youtube.com/watch?v=b4NeCGnpjP8 Prepare the 3 doors Push fit 3 hinges into the left door , the right door and the middle door...
- Page 24 Assembly Instructions Pre-mounted Hinge Fitting & Adjustment Step 39 https://www.youtube.com/watch?v=b4NeCGnpjP8 Fit the doors and the handles When the hinges have Press the screws into been pushed in, 2 people are needed the holes in the panels tighten up their screws here Fit 1 door at a time, by lining up...
- Page 25 Assembly Instructions Step 40 Pre-mounted Hinge Fitting & Adjustment https://www.youtube.com/watch?v=b4NeCGnpjP8 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown.
- Page 26 Assembly Instructions Step 41 Fit the door buffers Stick a door buffer onto the top corner of each door about 50mm in from the edge. Stick a door buffer onto the bottom corner of each door about 50mm in from the edge.
- Page 27 If in doubt, consult an expert. Assembly is complete If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020...
- Page 28 ALR3321...
Need help?
Do you have a question about the Adult Malibu 532/8038 and is the answer not in the manual?
Questions and answers