Page 1
Width - 41cm Depth - 47cm Height - 75-87cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800 Issue 1 - 11/11/16...
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the • During assembly do not stand • We do not components and tools listed on or put weight on the product, this recommend the the following pages.
Components - Parts If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the parts listed below Backrest 2 Seat Chair lift plate (36 x 39 x 16cm) (41 x 38.5 x 6.5cm) (25.5 x 13.5 x 6cm)
Page 4
Assembly Instructions Step 1 Attaching backrest Place the seat upside down on a raised, flat and protected surface. Position the backrest on the seat as shown. Secure using bolts then tighten bolts using allen key Step 2 Arrow Attaching mounting plate Lever Position the mounting...
Page 5
Assembly Instructions Step 3 Attaching castors Place the base upside down on a flat protected surface. Attach the castors into holes on the base and secure by pressing down firmly. Step 4 Attaching gas lift Place the base on a Plastic tip flat protected surface.
Page 6
To lower the seat, lift up the lever while seated on the stool. Lever Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800...
Need help?
Do you have a question about the 548/7903 and is the answer not in the manual?
Questions and answers