Daewoo NEO-V RCP33 Series Svc Manual page 32

6-8. Door Switch Control
- High / Low Signal
A. R Door Switch
1) Door Open
- Door Open -> Door Switch On -> Micom Low (0V) signal Input.
2) Door Close
- Door Close -> Door Switch Off -> Micom High (5V) signal Input.
6-9. Lamp Control
- Door Open / Close State
- Lamp On Elapsed time
A. R Lamp
1) Door Switch Error
- R Lamp is always off.
2) No Door Switch Error
① Door Open -> Lamp On, After 10 minutes, Lamp is forcibly off.
② Door Close -> Lamp Off.
Input
Input
NEO-V SVC MANUAL
Output
- Door Open / Close State
Output
- Lamp On / Off Operation
31