Avaya D100 Install Manual page 6

Page 6
Next it will say "Ext. #:"
Enter the extension number you assigned earlier on Page 3. (I used 8000 in my system)
Now, press the soft key with "OK" above it.
Next it will say "Password:"
This is the password (Login Code) you assigned earlier on Page 3
Enter it now.
The LCD will say "Connecting"
If all worked OK you will see the Name on LCD (D100 in my case) that you assigned on Page 3
along with the Extension Number. (also assigned on Page 3)
Mine looks like this D100:8000 in the LCD.
You can make and receive calls on the D160 Handset.
If the Data Switch that the D100 is connected to does not have POE, you will need the following:
The correct POE Power Injector for the D100 is:
SPPOE-1A-IP PHONE SINGLE PORT POE INJECTOR
--------- Special Notice ---------
Enable this...
In Release 9.1 and higher, Avaya DISABLES "SIP Registrar Enable"
You MUST Enable it for the D100 to work......