The Pc Begin To Receive Images - Accu-Scope 3025-LCD Manual

(1) Launch your software "NMS" on the desktop.
(2) Click the button
as the PC‟s IP address, port number (range from 2000 to 5000), and click "Start"
button, the system begins to send the datas. The button now changes from Start
to Stop; you can click "Stop" to stop send.

(4) The PC begin to receive images

(1) Make sure the software NMSClient has been installed in the PC.
(2) Launch the "NMSClient" software.
(3) Click the Receive button.
， a "Configure" dialog box appears. Set the IP Address
Input the PC‟s IP
address.
Click "Start"
43