Step 3: Unpack The Switch - NETGEAR GC110 Hardware Installation Manual

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
You can also take the following steps to prevent damage from electrostatic discharge
(ESD):
• When unpacking a static-sensitive component from its shipping carton, leave it in
the antistatic package until you are ready to install it. Just before unwrapping the
antistatic package, discharge static electricity from your body.
• Before moving a sensitive component, place it in an antistatic container or package.
• Handle all sensitive components in a static-safe area. If possible, use antistatic floor
pads, workbench pads, and an antistatic grounding strap.

Step 3: Unpack the switch

The following figures show the package contents.
Figure 7. Switch package contents model GC110
Letter Description
a GC110 switch
b Power cord
c Category 5e (Cat 5e) flat Ethernet cable
d Wall-mounting screws
e Installation guide
f Footpads
Installation 25 Hardware Installation Guide