Multi-Function Reset Button - NETGEAR GC110 Hardware Installation Manual

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Table 4. Supported SFP transceiver modules
Speed and Medium
1G Ethernet short-reach fiber
1G Ethernet long-reach fiber
1G Ethernet copper
For more information about NETGEAR SFP transceiver modules, visit
netgear.com/business/products/switches/modules-accessories.
Note: If you use a third-party passive direct-attach cable (DAC), the length of the cable
must not exceed 5 meters (16.4 feet).

Multi-function Reset button

The switch provides a recessed multi-function Reset button on the back panel so that
you can either restart (power-cycle) the switch, reset the switch to the most recently
saved cloud-managed configuration, or return the switch to its factory default settings,
causing all custom settings to be erased. The factory default settings function of the
Reset button is available only after you use the NETGEAR Insight app to remove the
switch from your network.
To restart or reset the switch or return the switch to its factory default settings:
1. Insert a device such as a straightened paper clip into the opening.
2. Do one of the following:
• Restart the switch. Press the Reset button for about two seconds. (Do not press
the button for more than five seconds!)
The switch restarts but retains its custom settings. During this process, the Power
LED lights amber.
• Reset the switch to the most recently saved cloud-managed configuration.
Press the Reset button for at least five seconds.
The switch restarts and returns to the most recently saved cloud-managed
configuration. During this process, the Power LED lights amber.
• Return the switch to its factory default settings. After you use the NETGEAR
Insight app to remove the switch from your network, press the Reset button for
at least five seconds.
The switch restarts and returns to its factory default settings. During this process,
the Power LED lights amber.
Hardware Overview
Model Description
AGM731F SFP transceiver 1000BASE-SX
AGM732F SFP transceiver 1000BASE-LX
AGM734 SFP transceiver 1000BASE-T
17 Hardware Installation Guide