NETGEAR GC110 Hardware Installation Manual page 7

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Note: Changes to Insight-manageable settings from the local browser UI might also
create conflicts with the rest of the Insight-managed network to which the device is
connected. While you manage the switch with the local browser UI, you cannot use
the Insight app or Insight Cloud portal. To reenable management of the device
remotely or through the cloud, you can return the management mode to NETGEAR
Insight at any time so that you can manage the switch with the Insight app or Insight
Cloud portal.
For more information about the local browser UI, see the user manual, which you
can download from netgear.com/support/download.
Note: The switch is designed for management by NETGEAR Insight: You can use
the NETGEAR Insight app on your mobile device or the Insight Cloud portal from a
web browser on your Windows-based computer, Mac, or tablet. By default, the local
browser UI is disabled and you cannot use it while the switch is managed by NETGEAR
Insight.
You can install the switch freestanding (on a desktop) or wall-mounted, using the
VESA-standard mounting holes and supplied wall-mount kit. The switch is IEEE compliant
and offers low latency. All ports can automatically negotiate to the highest speed, which
makes the switch very suitable for a mixed environment with Gigabit Ethernet and Fast
Ethernet.
For Gigabit Ethernet connections, use Category 5e (Cat 5e) or higher-rated Ethernet
cables terminated with RJ-45 connectors.
Introduction 7 Hardware Installation Guide