Maintenance And Inspection Schedule; Owner's Annual Inspection Record; Replacement Parts; Maintenance And Service Safety Tips - Skyjack SJ7127 RT Service Manual

Operator's Responsibility for Maintenance

Maintenance and Inspection Schedule

The actual operating environment of the work platform
governs the use of the maintenance schedule. The
inspection points covered in
and lnspection Checklist, indicates the areas of the
aerial platform to be maintained or inspected and at
what intervals the maintenance and inspections are to
be performed.

Owner's Annual Inspection Record

It is the responsibility of the owner to arrange quarterly
and annual inspections of the aerial platform.
Owner's Annual lnspection Record is to be used for
recording the date of the inspection, owner's name,
and the person responsible for the inspection of the
work platform.

Replacement Parts

Use only original replacement parts. Parts such
as batteries, wheels, railings, etc. with weight and
dimensions different from original parts will affect
stability of the aerial platform and must not be used
without manufacturer's consent.
All replacement tires must be of the same size and load
rating as originally supplied tires; to maintain safety and
stability of aerial platform.
Consult SKYJACK's Service Department for optional
tires specifications and installation.
WARNING
Any unit that is damaged or not operat-
ing properly must be immediately tagged
and removed from service until proper
repairs are completed.
Mid-Size Rough Terrain
Models 7127 & 7135
163761
Table 1.2. Maintenance
Table 1.1.
Service and Maintenance

Maintenance and Service Safety Tips

Maintenance and repair should only be performed by
personnel who are trained and qualified to service this
aerial platform.
All maintenance and service procedures should be
performed in a well lighted and well ventilated area.
Anyone operating or servicing this aerial platform
must read and completely understand all operating
instructions and safety hazards in this manual and
operating manual.
All tools, supports and lifting equipment to be used
must be of proper rated load and in good working order
before any service work begins. Work area should be
kept clean and free of debris to avoid contaminating
components while servicing.
All service personnel must be familiar with employer
and governmental regulations that apply to servicing
this type of equipment.
Keep sparks and flames away from all flammable or
combustible materials.
Properly dispose of all waste material such as
lubricants, rags, and old parts according to the relative
law provisions obtaining in the country.
Before attempting any repair work, turn Battery
Disconnect Switch to the "OFF" position.
Preventive maintenance is the easiest and least
expensive type of maintenance.
SKYJACK, Page 7