Calibration; Long-Term Storage - Observator Instruments ANALITE NEP-5000-LINK Manual

10.3 Calibration

Calibration should only be performed by experienced users who intend to configure the sensor in a
different mode.
Default calibration setup
Communication
Protocol
Auto-wipe
Auto-range
In order to calibrate, you will need complementary modules not included in this kit: The calibration cable
and the calibration module can be purchased separately. Alternatively, you can send the module back to
Observator Instruments for calibration.
Before calibrating the sensor, please read Chapter 10 of the "NEP-500 manual" available on our website.

10.4 Long-term storage

In order to increase the life-expectancy of NEP-5000-LINK products, we highly recommend you to switch
off the long-term storage internal switch on the Bluetooth module.
Note: The internal switch should be only used to turn off the unit if the device is in storage more than
six months or when transporting by air. Normally it is best to leave it on the "ON position" with the
cover closed at all times.
Manual | NEP-5000-LINK
Status: Final | Not confidential
TTL
Windows: Digital free-flow only
Android: Digital free-flow only
Recommended
Recommended
Switch-off the long-
term storage switch
Page 33 | 34
V20200304