Access Additional Information; Change Sensor Name - Observator Instruments ANALITE NEP-5000-LINK Manual

8.11 Access additional information

8.12 Change sensor name

1. On the menu page select "Live data" menu.
2. Click on the sensor name.
3. Type the new sensor name and select "Apply".
Note: When you change the sensor name, you will need to unpair the NEP-5000-LINK interface
module and pair your phone under the new device name, for more information, consult the section
"Pair the sensor via Bluetooth".
Manual | NEP-5000-LINK
Status: Final | Not confidential
1. On the menu page select "About"
menu.
2. Compatibility information and
documentation links are available on
the "About" page.
Page 25 | 34
V20200304