Turn Off Nep-5000-Link Interface; Quit The Application - Observator Instruments ANALITE NEP-5000-LINK Manual

8.8 Turn off NEP-5000-LINK interface

8.9 Quit the application

Manual | NEP-5000-LINK
Status: Final | Not confidential
We highly recommend to disconnect
the wireless when not taking
measurements.
1. In the menu page select "Devices"
menu.
2. Click on "Disconnect from NEP-
LINK" button to disconnect the sensor.
This will immediately turn off the NEP-
5000-LINK interface module and turn
off the Bluetooth LED indicator.
Note: Unplugging the sensor from the wireless
device will not turn off the module.
1. You can quit the application at any
time by pressing on the return button
of your phone.
2. Click on "Ok" to confirm that you
are ready to shut down the application.
This action will immediately turn off the
NEP-5000-LINK interface module.
Page 23 | 34
V20200304