Installation; Install The Sensor For The First Time - Observator Instruments ANALITE NEP-5000-LINK Manual

7

Installation

7.1 Install the sensor for the first time

Connect the Li-Ion battery to the NEP-5000-LINK interface module (normally installed when provided). If it
is not, please follow the instruction described in chapter 10. Section 10.1: "Battery replacement".
To install the Android application on your smartphone, use the following link, download and install the
".apk file" (for smartphone).
1. Remove the protective caps and connect NEP-5000-LINK sensor to the NEP-5000-LINK interface
module.
Figure 7.A: Download & install NEP-LINK application
Manual | NEP-5000-LINK
Page 13 | 34
Status: Final | Not confidential
V20200304