Observator Instruments ANALITE NEP-5000-LINK Manual page 14

Press on the NEP-5000-LINK interface module button and you will notice the blue Light-Emitting Diode
(LED) indicator turning on. If you cannot see the blue indicator light, it means the NEP-5000-LINK
interface module is not powered.
Note: In the event where the indicator is not lighting up, ensure that the NEP-5000-LINK interface
module has enough battery (refer to the Section 10.1: "Battery replacement" of this manual) and
ensure that the long term storage switch inside the Bluetooth module is on.
Note: If storing the wireless interface for more than six months, please power off the device.
Light-Emitting Diode (LED)
status
Flashing blue
Flashing green
Flashing red, blue & green
No LED
2. Run the app: go to the Chapter 8: "Android application interface" of this document.
Manual | NEP-5000-LINK
Status: Final | Not confidential
Blue LED is on
Colour
Device is paired and connected
NEP-5000-LINK interface module off
Long-term
storage switch
is on
Meaning
Bluetooth available for pairing
Battery is charging or charged
Page 14 | 34
V20200304