Table of Contents
Advertisement
8.2 Pair the sensor via Bluetooth
Blue indicator is
flashing
Manual | NEP-5000-LINK
Status: Final | Not confidential
After having activated the Bluetooth of your
phone:
1. Turn on the NEP-5000-LINK interface by
pressing on the blue button, make sure that the
blue LED indicator turns on.
Note: Step 2 to 5 are to be completed only the first
time you connect to a new sensor.
2. Go to the Bluetooth settings, scan to find the
new device. Select the new sensor to pair and
press pair.
3. Wait while pairing the sensor.
4. Allow pairing by pressing "Ok".
5. Sensor is now shown as paired, you can now
run NEP-LINK application.
Page 17 | 34
V20200304
Advertisement
Table of Contents
Need help?
Do you have a question about the ANALITE NEP-5000-LINK and is the answer not in the manual?