Cleaning The Sensor - Observator Instruments ANALITE NEP-5000-LINK Manual

4. Close the Li-Ion battery holder.
5. Finally, screw the cover of the Bluetooth interface module.

10.2 Cleaning the sensor

After each use, do not disconnect the sensor from the hand-held. It is strongly recommended that the
sensor be thoroughly washed in clean water after deployment and prior to storage.
In the field, wash the sensor with fresh water and clean it with a soft cloth.
In the office, we recommend to clean the sensor with isopropyl alcohol (available from grocery stores) and
dry the sensor with compressed air.
Manual | NEP-5000-LINK
Page 32 | 34
Status: Final | Not confidential
V20200304