Kane 457 Manual page 17

MAIN MENU SUB MENU
REPORT PRESSURE
TIGHTN'S
TEMP
EXIT
MAIN MENU SUB MENU
CONTRAST
SCREEN
AUX
HEADER
EXIT
SERVICE CODE
NOTE: To EXIT the MENU at any time simply move the rotary switch to any
position other than "Menu". Any changes that have not been
"entered" will be ignored.
WARNING:
Before using the KANE457 to measure the pressure of a gas/air ratio valve, read the
boiler manufacturer's instructions thoroughly. If in doubt contact the boiler
manufacturer.
After adjusting a gas/air ratio valve it is essential that the CO, CO
readings are within the boiler manufacturer's specified limits.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk
OPTIONS / COMMENTS
Stored pressure tests:
VIEW, DEL ALL, EXIT
Stored tightness tests:
VIEW, DEL ALL, EXIT
Stored differential temperature tests:
VIEW, DEL ALL, EXIT
OPTIONS / COMMENTS
Factory setting is 04
Enables users to customise the parameters on the
AUX display: LINE 1, LINE 2, LINE 3, LINE 4, EXIT
Printout header, 2 lines, 20 characters per line:
HEADER 1, HEADER 2, EXIT
Password protected for authorised service agents
only. Leave set to 0000.
KANE457 manual
and CO/CO ratio
2 2
Page 17