Rinnai Compact 2 Operation Manual
Hide thumbs Also See for Compact 2:

Advertisement

Quick Links

Compact 2 gas fireplace
Operation guide

Advertisement

Table of Contents
loading

Summary of Contents for Rinnai Compact 2

  • Page 1 Compact 2 gas fireplace Operation guide...
  • Page 2 Important Appliance must be installed with a Rinnai approved flue system. This appliance must be installed in accordance with: - Manufacturer’s installation instructions - AS/NZS 5601 Gas Installations - AS/NZS 5263 Gas appliance standards For use with Natural Gas or Universal LPG as indicated on the appliance.
  • Page 3: Table Of Contents

    Installation checklist..........11 Installer details............11 Limited Warranty ..........12 Purchase details and product registration ....14 Servicing Gas fires, like cars, require regular maintenance and servicing. For reliable operation Rinnai gas fires should be serviced every two years, including inspection of the flue system.
  • Page 4: Safety

    Do not unplug the appliance while it is Do not allow curtains or other combustible operating. Do not use power boards or double materials to come into contact with the fire. adapters to operate the unit. 4 | Compact 2 operation guide: 11837-D 04-20...
  • Page 5: Safety Devices

    The overheat protection may then shut off the gas to protect the unit, however switching to its lowest setting may allow the fire to continue operating without overheating. Compact 2 operation guide: 11837-D 04-20 | 5...
  • Page 6: Clearances

    100 mm of clearance from the edge of the TV installation above the fire glass. For example: Installing a TV directly above the Compact 2 Mantel depth A: Clearance required is not recommended due to the heat being...
  • Page 7: General Information

    Rinnai gas fire. Electrical connection Care and maintenance The Compact 2 comes with a 1.5 m power cord All external surfaces of the fire can be cleaned and a 3-pin plug. The electrical connection can using a soft damp cloth and mild detergent. Do...
  • Page 8: Operating Your Compact 2

    Operating your Compact 2 Your Compact 2 is operated by manual push button control, located on the left hand side of the appliance. Ignition Firmly press the IGN button for ten seconds and release. This operates the built-in safety device and starts the electronic spark—lights to pilot.
  • Page 9: Troubleshooting

    During installation there will be an initial burning in period where some smoke and smell may be experienced. This is a normal part of the operation. The Compact 2 is fitted with an overheat safety switch. Under overheat conditions this switch will shut off the fire. If the unit shuts off repeatedly servicing may be required.
  • Page 10: Abnormal Flame Pattern

    Abnormal flame pattern Each Rinnai flame fire has a distinct flame pattern. This should look the same every time you start your fire, after an initial warm up period of approximately 20 minutes. Abnormal flame performance and/or pattern can indicate a problem with your fire, such as blocked gas injectors, or shifting of burn media.
  • Page 11: Installation Checklist

    Checklist F Appliance positioned in a suitable location (clearances, mantels, surrounds etc.). F Rinnai flue system installed and tested to ensure effective draw. F Gas pressure checked and set according to the data plate. F Burn media installed as per instructions.
  • Page 12: Limited Warranty

    Rinnai brings you peace of mind with a: 5-year firebox warranty This warranty is applicable to all Rinnai gas fires manufactured from 01 May 2019. All terms of the warranty, subject to the conditions below, are effective from the date of first installation. The attending service person reserves the right to verify this by requesting a copy of the gas certificate of compliance prior to commencement of any warranty work.
  • Page 13 8. Rinnai reserves the right to have installed product returned to the factory for inspection. 9. Where the gas fire is installed outside the metropolitan area or further than 40 km from a Rinnai authorised service centre, travel costs shall be the owner’s responsibility.
  • Page 14: Purchase Details And Product Registration

    Warranty claim To make a warranty claim, contact Rinnai on 0800 RINNAI (0800 746 624) or email info@rinnai.co.nz. 14 | Compact 2 operation guide: 11837-D 04-20...
  • Page 16 Rinnai.co.nz 0800 746 624 http://www.youtube.com/rinnainz http://www.facebook.com/rinnainz Serial number Compact 2 operation guide:11837-D...

Table of Contents