Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Gorenje K97320AX
Summary of Contents for Gorenje K97320AX
- Page 1 461308264_000 10/2013...
- Page 2 The appliance was designed and made in accordance with the European standards listed below: => EN 30-1-1, EN 30-2-1 and EN 437 plus subsequent amendments (gas) => EN 60 335-1 and EN 60 335-2-6 (electrical) plus relative amendments The appliance complies with the prescriptions of the European Directives as below: =>...
-
Page 3: Table Of Contents
ASSISTANCE AND SPARE PARTS Before this appliance left the factory it was tested and fine-tuned by specialised expert personnel in order to guarantee its best functioning results. Any subsequent repairs or adjustments that may be necessary must be done with the maximum of care and attention by qualified personnel. -
Page 4: Important Notes And Precautions For Use
IMPORTANT NOTES AND PRECAUTIONS FOR USE removed from the outer surfaces and You have purchased one of our the various inner parts, thoroughly products for which we thank you. We check that the appliance is in perfect are confident that this new appliance, condition. - Page 5 IMPORTANT NOTES AND PRECAUTIONS FOR USE • The oven door glass and the temperature for two hours. This will accessible parts will become hot allow the protective coating on the when in use. To avoid burns and interior of the oven to be burnt off scalds young children should be and dissipate the associated smells.
- Page 6 IMPORTANT NOTES AND PRECAUTIONS FOR USE • The appliance is not intended to be turn the appliance off and switch off operated by means of an external the electrical supply and do not tamper timer or separate remote-control with it. All repairs or adjustments must system be carried out with maximum care and •...
-
Page 7: Description Of The Appliance
DESCRIPTION OF THE APPLIANCE PRESENTATION The cooker is fitted with of hob gas and the one electric oven. Each knob on the front panel has a diagram printed above it showing to which burner or heating element it refers. The combination of the different sized burners and electric heating element offers the possibility of various types of cooking. - Page 8 DESCRIPTION OF THE APPLIANCE DESCRIPTION OF THE CONTROLS HOB GAS BURNER KNOB (A) By turning the knob we will find the following symbols = Closed position = “Full on” position = “Reduced rate” position FAN OVEN FUNCTION SELECTOR KNOB (8) (B) By turning the knob we will find the following symbols: = Oven off = Oven light on, which stays on for all functions...
- Page 9 DESCRIPTION OF THE APPLIANCE ELECTRONIC PROGRAMMER The programmer can select the following functions: - Clock (set by keys 2 and 3) - Minute counter (set by key 1) - Cooking time (set by key 2) - End of cooking (set by key 3) - Manual operation mode (set by key 4) 1 2 3 4 5 6...
-
Page 10: Instructions For The User
INSTRUCTIONS FOR THE USER HOB: GENERAL NOTES ON SAFETY Burners Ø pan cm Ultrarapid 22÷24 When a gas cooker is being used it produces heat and humidity in the room where it is installed. Rapid 20÷22 For this reason the room must be well ventilated, Semi-rapid 16÷18 keeping the natural ventilation openings free and... - Page 11 INSTRUCTIONS FOR THE USER HOW TO USE THE MULTIFUNCTION OVEN FAN + REAR HEATING COMBINED COOKING Turn the selector knob to the symbol and set the DEFROSTING AT ROOM TEMPERATURE thermostat knob to the desired temperature, then Turn the selector knob to the symbol and place the place your food the oven.
- Page 12 INSTRUCTIONS FOR THE USER USEFUL COOKING TIPS Meat: • If, when cooking meat, the time needed is more than 40 minutes, turn the oven off 10 minutes Cakes and bread: before the end of cooking time to exploit the • Heat the oven for at least 15 minutes before you residual heat (energy saving).
- Page 13 INSTRUCTIONS FOR THE USER COOKING / BAKING TIMETABLE COOKING BY COOKING BY Weight Position of the oven NATURAL CONVECTION FORCED CONVECTION (WITH FAN) FOODS shelf from the bottom Temperature Cooking Time Temperature Cooking Time in °C in min in °C in min MEAT Roast veal...
- Page 14 INSTRUCTIONS FOR THE USER CLEANING AND MAINTENANCE OVEN SEAL To keep the surface of the hob and the various The oven seal guarantees the correct functioning of the oven. We recommend you: components in pristine condition (grill, enamelled covers, burner heads and flame diffusers, it is very •...
-
Page 15: Troubleshooting
INSTRUCTIONS FOR THE USER OVEN DOOR REMOVAL The oven door can be removed to give easier access to the oven when cleaning. To remove, proceed as follows: • Open the oven door and insert rivet or nail (R) in the hole (F) of the hinge (fig. -
Page 16: Technical Features
TECHNICAL FEATURES OUTSIDE COOKER DIMENSIONS TYPE height h width L depth P COOKER 850 ÷ 920 90 x 60 BURNERS TECHNICAL DATA TABLE DIAMETER AIR REG. OPERATING BURNERS RATE INJECTOR HEAT INPUT SLEVE PRESSURE GAS PASS SABAF OPENING DENOMINATION mbar 1/100 mm “X”... -
Page 17: Instructions For The Installer
INSTRUCTIONS FOR THE INSTALLER regular combustion of the gas and for the ventilation of TECHNICAL INFORMATION the room. The natural flow of air must be direct through • The installation, adjustments, conversions and permanent openings in the walls of the room that open maintenance operations listed in this part must directly to the outside with a minimum cross section of only be carried out by qualified personnel. - Page 18 INSTRUCTIONS FOR THE INSTALLER POSITIONING THE COOKER The appliances are fitted with the following parts to enable them to be correctly positioned: • Backguard. The cookers which are equipped with this accessory, leave of the factory with this particular inserted inside the packing. In order to install the backguard, it is necessary to loosen the screws positioned on the back of the hob and then AIR INLET MIN.
- Page 19 INSTRUCTIONS FOR THE INSTALLER SECURING THE COOKER TO WALL (fig.16) Note:- The installation of the chain provided is for safety reasons, it must be installed as indicated below. To prevent the cooker tipping forwards in the event of children standing on the oven door or where users put extreme weight on the door when in open position, two chains MUST BE fixed to the back of the oven which should at all times be secured to the threaded pins .
- Page 20 INSTRUCTIONS FOR THE INSTALLER whose joints must be made using sealed fittings in GAS CONNECTION accordance with the standard. • with a flexible stainless steel, seamless pipe in Before connecting the appliance check that the data on the rating plate affixed to the cooker, accordance with the standard, with a maximum correspond to those of the gas mains.
- Page 21 INSTRUCTIONS FOR THE INSTALLER ELECTRICAL CONNECTION REPLACING THE ELECTRICAL COMPONENTS • The rear protection will have to be removed in order The electrical connection must be carried out in to change the electrical heating elements, spit accordance with the current standards and laws motor, terminal board and power cable.
- Page 22 INSTRUCTIONS FOR THE INSTALLER ADJUSTMENTS CONVERSIONS • All seal must be replaced by the technician REPLACING THE INJECTORS following any adjustment or regulation. Our burners can be adapted to different types of • The adjustment of the reduce rate (simmer) gas by simply installing the injectors suitable for the must be undertaken only with burners...
- Page 23 INSTRUCTIONS FOR THE INSTALLER MAINTENANCE REPLACING THE TAPS Proceed in the following way when replacing a tap or the thermostat: • Remove pan supports, burner heads. • Unscrew the burner fixing screws (Vc) (fig. 21).(four for ultrarapid burner and two for the other burners) •...
Need help?
Do you have a question about the K97320AX and is the answer not in the manual?
Questions and answers