Cannot Solve Problem After Trying All Solutions; Cannot Solve Printing Or Copying Problems - Epson EcoTank ET-15000 Series User Manual

Solving Problems
ECM setting is disabled.
Solutions
Select Settings > General Settings > Fax Settings > Basic Settings and enable the ECM setting on the
control panel. This may clear errors that occur due to connection problems. Note that the speed of
sending and receiving faxes may be slower than when ECM is disabled.
The image quality setting is low on the sender's fax machine.
Solutions
Ask the sender to send faxes at a higher quality.

Cannot Solve Problem After Trying All Solutions

If you cannot solve the problem after trying all of the solutions, contact Epson support.
If you cannot solve printing or copying problems, see the following related information.
Related Information
"Cannot Solve Printing or Copying Problems" on page 242
&

Cannot Solve Printing or Copying Problems

Try the following problems in order starting at the top until you solve the problem.
❏ Make sure you match the paper type loaded in the printer and the paper type set on the printer to the paper
type settings in the printer driver.
"Paper Size and Type Settings" on page 29
❏ Use a higher quality setting on the control panel or the printer driver.
❏ Align the print head.
"Aligning the Print Head (Control Panel)" on page 136
❏ Run a nozzle check to see if the print head nozzles are clogged.
If there are missing segments in the nozzle check pattern, the nozzles may be clogged. Repeat head cleaning and
the nozzle check alternately 3 times and check if the clogging has cleared.
Note that print head cleaning uses some ink.
"Checking and Cleaning the Print Head" on page 132
❏ Turn off the printer, wait for at least 12 hours, and then check if the clogging has cleared.
If the problem is clogging, leaving the printer for a while without printing may solve the problem.
You can check the following items while the printer is off.
❏ Check that you are using genuine Epson ink bottles.
Try to use genuine Epson ink bottles. The use of non-genuine ink bottles may cause print quality to decline.
❏ Check if the translucent film is smeared.
If there are smears on the translucent film, carefully wipe off the smear.
"Cleaning the Translucent Film" on page 141
>

Cannot Solve Problem After Trying All Solutions

>
Cannot Solve Printing or Copying Problems
242