Selecting Recipients; Various Ways Of Sending Faxes - Epson EcoTank ET-15000 Series User Manual

Faxing
>
Sending Faxes Using the Printer
Related Information
"Fax Settings" on page 117
&

Selecting Recipients

You can specify recipients on the Recipient tab to send the fax using the following methods.
Entering Fax Number Manually
Select Keypad, enter a fax number on the screen displayed, and then select OK.
- To add a pause (pause for three seconds during dialing), enter a hyphen (-).
- If you have set an external access code in Line Type, enter "#" (hash) instead of the actual external access code at
the beginning of the fax number.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On. Select fax
recipients from the contacts list or the sent fax history.
Select the recipients from the contacts list
Select Contacts and select recipients you want to send. If the recipient you want to send to has not been registered
in Contacts yet, select Add Entry and register it.
Select the recipients from the sent fax history
Select Recent, and then select a recipient.
Note:
To delete recipients you entered, display the list of recipients by tapping on the field of a fax number or the number of
recipients on the LCD screen, select the recipient from the list, and then select Remove.
Related Information
"Making Contacts Available" on page 317
&
"Recipient" on page 116
&

Various Ways of Sending Faxes

Sending a Fax after Checking the Scanned Image
You can preview the scanned image on the LCD screen before sending the fax. (Monochrome faxes only)
1. Place the originals.
2. Select Fax on the home screen.
3. Specify the recipient.
"Selecting Recipients" on page 110
>
Various Ways of Sending Faxes
110