Maintaining the Printer
Important:
c
Wipe off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
5. Use a new dry cotton swab to wipe the film.
Important:
c
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
6. Repeat steps 4 and 5 until the film is not smeared.
7. Visually check that the film is not smeared.
Cleaning the Printer
If the printer's outer case is dirty or dusty, turn off the printer and clean it with a soft, clean, and moist cloth. If you
cannot remove the dirt, try cleaning with a soft, clean, and moist cloth moistened with a mild detergent.
>
Cleaning the Printer
143