ADDER ADDERLink INFINITY 4000 User Manual page 30

TX - UI Settings
To get here
You can access this page in two ways:
1 On the console keyboard attached to the RX unit, access
the OSD by pressing CTRL + ALT + C.
2 Click on the Transmitters option.
3 Click the UI Settings link.
OR
1 Connect a computer to the same network as the TX unit.
2 Run a web browser and enter the IP address of the TX
unit: http://169.254.1.33 (this is the default address when
using SFP port 3). If you are using SFP port 4 then the
default address will be http://169.254.1.43
If the IP address is unknown, press the small button on the
front panel next to the OLED screen to reveal the value
for IP Address 3 (or IP Address 4) and use that address.
3 Click the UI Settings link.
UI Settings
Front Panel Timeout - Determines the period of inactivity that should
elapse before the front panel display should return to a blank state.
LED brightness - Determines the brightness of the front panel LED
indicator.
Language - Determines the language used for all text labels within the
configuration pages.
29