Spare parts/accessories
11.3 Mini handheld unit
11.3.4
Connection
Basic procedure
A connection kit that must be ordered separately is required for connection of the mini HHU.
This connection kit contains a flange socket made of metal for installation in the control
housing on the machine and a terminating connector for overriding the EMERGENCY OFF
circuit when the mini HHU is not connected.
Figure 11-22 Connection diagram
1. Use the hole pattern for the wall of the control housing.
2. Insert the connection kit through the large drill hole into the control housing.
3. Mount the flange socket (with seal) onto the control housing.
4. Connect the connecting cables according to the circuit diagram.
116
Manual, 06/2009, 6FC5397-2DP10-0BA0
PPU