Manitou A Series Manual page 88

The choice of gear ratio should be made carefully according to the nature of the work being carried out. A poor choice may
result in the extremely rapid elevation of the transmission oil temperature through excessive slipping of the converter, which
could lead to serious damage to the transmission (it is essential to stop and change the working conditions if the
transmission oil temperature indicator light comes on). This poor choice may also result in a reduction in the lift truck's
performance in forward speed. When the forward force increases, the forward speed in the r gear (for example 3rd gear) may
be lower than the forward speed that could be obtained with the r-1 gear (in 2nd instead of the 3rd).
In general, we would advise you to use the following gears according to the nature of the work being carried out.
• On the road : Set off in 4th gear if the conditions and state of the road permit it. In hilly areas, set off in 3rd gear and go up to
4th (the use of the 5th gear is prohibited) if the conditions and state of the road permit it.
• With a trailer on the road : Set off in 2nd gear and go up to 3rd and then to 4th if the conditions and state of the road permit it.
• Handling : 3rd or 4th gear.
2nd gear in restricted spaces.
• Earth moving : 1st gear.
• Loading (reclaiming with bucket, manure fork, etc.) : 2nd gear.
PULSE DOWNSHIFTING (KICK DOWN)
Button 2 on the end of the lever lets you change down one gear with an initial pulse (The selected gear flashes on the dial 1)
and re-engage the initial with a second pulse. This function can be used for climbing gradients or for earthworks for example.
SWITCH FOR DISABLING AUTOMATIC 5TH GEAR
This switch gives the option of disabling automatic 5th gear and should be used
according to the work required. When the indicator light is on, this option is in use.
Use of this device should be compulsory if you are pulling a trailer, in order to reduce
the risk of overheating the transmission. In addition, disabling automatic 5th gear will
ensure that you are complying with the speed limits when a coupling is attached.
19 - P
ARKING BRAKE LEVER
To prevent accidental loosening or release, the lever is fitted with safety locking.
- To apply the parking brake, pull the lever backwards (Position A).
- To loosen the parking brake, release and push the lever forwards (Position B).
2 - 59
A
B