Technical Specifications - Graco SaniSpray HP 20 Operation - Repair - Parts

Technical Specifications

SaniSpray HP 20 Corded Airless Handheld
Sprayer
Max Working Pressure
Maximum Amperage
Weight
Dimensions
Length
Width
Height
Storage Temperature Range 
Operating Temperature Range
Storage Humidity Range
Noise
Sound Pressure Level
Sound Power Level †
Vibration level (measured in
accordance with EN50580:2012)
Power Cord
Length
Electrical Power Requirement
Maximum tip orifice
Notes
 Pump damage will occur if disinfectant or water freezes in pump.
 Damage to plastic parts may result if impact occurs in low temperature conditions.
† All readings were taken within the priming mode at the assumed operator position. Sound
power levels were tested to ISO 3741 at 3.3 feet (1m).
3A7646C
Technical Specifications
U.S.
1000 psi
3.6 Amps
4.6 lb
14.0 in.
5 in.
11.8 in.
32° to 113° F
40° to 90° F
0% to 95% relative humidity, non-condensing
85.1 dBa
90.0 dBa, Uncertainty K = 0.5 dBa
Vibration total value
2
a = 21.5 ft/s
h
Uncertainty = 0.3 ft/s
18 AWG, 3-wire
18 in.
120 Vac, 60 Hz, 15A, 1 Ø
0.019 in.
Metric
6.9 MPa, 69 bar
3.6 Amps
2.1 kg
36.1 cm
12.7 cm
30.0 cm
0° to 45° C
4° to 32° C
Vibration total value
a = 6.5 m/s
h
2
Uncertainty = 0.1 m/s
2
1.0 mm , 3-wire
45.7 cm
0.48 mm
2
2
25