Jump-Starting - BMW Motorrad R 1250RT Rider's Manual

Place speaker cover 1 in posi-
tion and fit screws 2.
Replacing LED tail light
The LED tail light can only be
completely replaced.
Please contact a specialist
service facility for this pur-
pose, preferably an authorized
BMW Motorrad retailer.
Replacing LED turn
indicator
LED turn indicators can only
be replaced as a complete
unit. Please contact a special-
ist service facility for this pur-
pose, preferably an authorized
BMW Motorrad retailer.
Replacing LED auxiliary
headlights
with additional headlight
The LED auxiliary headlights can
only be replaced in full. It is not
possible to replace individual
LEDs.
Please contact a specialist
service facility, preferably an
authorized BMW Motorrad
Retailer.

Jump-starting

ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the mo-
torcycle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle
OE
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
higher than 12 V
Damage to the motorcycle's
electronics
The battery of the donor mo-
torcycle must have a voltage of
12 V.
Park motorcycle, ensuring that
support surface is firm and
level.
Remove battery cover (
Do not disconnect the battery
from the onboard electrical sys-
8
159
z
162).