Lighting; Jump-Starting - BMW Motorrad R nineT 2022 Rider's Manual

128 MAINTENANCE
Tighten screw 1.
Silencer to passenger
frame
M8 x 40
19 Nm
Extend the side stand.
Remove the rear-wheel stand.
Place the motorcycle on its
side stand.

LIGHTING

Replacing LED light sources
WARNING
Vehicle overlooked in traffic
due to failure of the lights
on the vehicle
Safety risk
Always replace a faulty bulb
at the earliest possible op-
portunity. Consult a special-
ist workshop, preferably an
authorised BMW Motorrad
Retailer.
All light sources of the vehicle
are LED light sources. The
service life of the LED light
sources is longer than the
presumed vehicle service life.
If an LED light source is faulty
contact a specialist workshop,
preferably an authorised
BMW Motorrad retailer.

JUMP-STARTING

CAUTION
Touching live parts of the
ignition system when the
engine is running
Electric shock
Do not touch parts of the
ignition system when the
engine is running.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with
fully insulated crocodile clips
at both ends.