Replace the defective light
source.
Bulb for parking light
without
OE
headlight control
LED
with
OE
headlight control
W5W / 12 V / 5 W
To protect the glass of the
new light source from getting
dirty, hold it with a clean, dry
cloth.
Insert 1 lamp in socket.
Insert the socket 1 into the
headlight housing.
Position cover panel and in-
stall it by turning clockwise.
JUMP-STARTING
CAUTION
Touching live parts of the
ignition system when the
engine is running
Electrocution
Do not touch parts of the
ignition system when the
engine is running.
ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the
motorcycle electronics
Do not jump-start the mo-
torcycle using the power
socket, only via the battery
terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle
Danger of short circuit
Use jump leads fitted with
fully insulated crocodile clips
at both ends.
197