Jump-Starting - BMW Motorrad K 1600 B Rider's Manual

Position the side panel 3 and
install the screw 2.
Align the slipstream
deflector 1.
Replacing LED additional
headlights
with auxiliary headlights
The LED additional headlights
can be replaced as a complete
unit only.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replace LED flashing turn
indicators
The LED flashing turn indicators
can be replaced only as a com-
plete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replacing LED rear light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.

Jump-starting

OE
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
8
147
z