Overland Storage SnapServer XSD 40 Instructions

Add-on/Spare PCIe Card Instructions
This document describes how to add a new PCIe card or remove
and replace an existing PCIe card in a SnapServer XSD 40
from Overland Storage.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working
with the unit.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder
Schäden am Gerät zu vermeiden, ziehen Sie stets den
Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT: Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION: While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.

Register the Add-on Card

When adding a PCIe card to your unit, you must first register
it to activate the warranty. Technical and warranty support
are not available until this is done:
1. Go to the Overland Storage website
http://www.overlandstorage.com/
Selec
2. t
Service & Support > My Products
3. At the Site Login, enter your e-mail address and
password, and click
4. Click the Manage Products
5. From the Product Selector drop-down list, select the XSD
40 in which you are installing the PCIe card.
Add a Component
6. Click
7. Enter the PCIe card information.
8. Click Save & Exit .
IMPORTANT: Your warranty certificate will be emailed to you.
Follow the instructions included in the email to complete the
registration process.
10400593-001
.
GO .
button.
.
©2014 Overland Storage, Inc.
SnapServer XSD 40
®
Enter
Enter
5325301507-XSD 40 s/n: 0247
Page 1 of 4