Overland Storage SnapServer XSD 40 Quick Start Manual

Add-on/Spare Disk Drive Instructions

This document describes how to either add a new disk drive or
remove and replace an existing disk drive in a SnapServer
XSD 40 Desktop Storage Appliance from Overland Storage.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working
with the unit.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder
Schäden am Gerät zu vermeiden, ziehen Sie stets den
Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.

Register the Add-on Drives

When adding an additional drive to your server, you must first
register it to activate the warranty. Technical and warranty
support are not available until this is done:
1. Go to the Overland Storage website
http://www.overlandstorage.com/
Selec
2. t Service & Support > My Products
3. At the
Site Login, enter your e-mail address and
password, and click
4. Click the Manage Products
5. From the Product Selector drop-down list, select the
XSD 40 in which you are installing the extra drive.
6. Click Add a Component
7. Enter the drive information.
8. Click Save & Exit .
IMPORTANT: Your warranty certificate will be emailed to you.
Follow the instructions included in the email to complete the
registration process.
10400569-001
.
GO .
button.
.
©2014 Overland Storage, Inc.
SnapServer XSD 40
®
Enter
Enter
5325301507-XSD 40 s/n: 0247
Page 1 of 3