Download
Share
Print this page
Kobalt CID120KU User Manual
  1. Manuals
  2. Brands
  3. Kobalt Manuals
  4. Impact Driver
  5. CID120KU
  6. User manual
Kobalt CID120KU User Manual

Kobalt CID120KU User Manual

12 v
Hide thumbs

Advertisement

Quick Links

Download this manual
KOBALT® and the K Design® are registered
trademarks of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST,
Monday - Friday.
AB13595B
Purchase Date
1
ITEM #0233384
12 V IMPACT
DRIVER
MODEL #CID120KU
Français p. 14
Español p. 27

Advertisement

loading
Need help?

Need help?

Do you have a question about the CID120KU and is the answer not in the manual?

Questions and answers

Related Manuals for Kobalt CID120KU

Summary of Contents for Kobalt CID120KU

  • Page 1 12 V IMPACT DRIVER MODEL #CID120KU Français p. 14 Español p. 27 KOBALT® and the K Design® are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS ......................2 Package Contents ....................... 3 Safety Information ....................... 4 Operating Instructions ......................8 Care and Maintenance ..................... 12 Troubleshooting ........................ 12 Warranty ........................... 13 Replacement Parts List ....................13 PRODUCT SPECIFICATIONS COMPONENT SPECIFICATIONS Charger Voltage 120 V ~ 60 Hz Rated Voltage 12 V No Load Speed...

  • Page 3: Package Contents

    PACKAGE CONTENTS PART DESCRIPTION PART DESCRIPTION Collet Locking Sleeve Fuel Gauge LED Light Soft Grip Handle On/Off Switch Belt Clip Battery Pack Slotted Screwdriving Bit Battery Release Button #2 Phillips Screwdriving Bit Forward/Reverse Rotation Control Charger kobalttools.com...

  • Page 4: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday. This instruction manual contains important information necessary for the proper assembly and safe use of this tool.
  • Page 5 SAFETY INFORMATION ELECTRICAL SAFETY Power tool plugs MUST match the outlet. NEVER modify the plug in any way. DO NOT use any electric shock. is an increased risk of electric shock if your body is grounded. DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 6 SAFETY INFORMATION POWER TOOL USE AND CARE DO NOT force the power tool. Use the correct power tool for your application. The correct power tool DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Page 7 SAFETY INFORMATION WARNING: DO NOT disassemble, heat above 100°C (212°F), or incinerate. DO NOT DO NOT NEVER put batteries in mouth. If swallowed, contact your physician or local poison control center. CAUTION explosion. use a visibly damaged battery pack or appliance as applicable. DO NOT modify or attempt to repair the appliance or the battery pack as applicable.

  • Page 8: Operating Instructions

    OPERATING INSTRUCTIONS USING YOUR BATTERY PACK Note: Before using the tool, read the instruction book carefully. WARNING: NOT attempt to use any other devices. NEVER battery pack connections because an electrical failure and hazard will occur. UNCHARGED and you must charge once before use. When you charge the new battery or one which has not been used for long periods of time, it may not reach full charge until after you have discharged it fully in use and recharged it several times.
  • Page 9 OPERATING INSTRUCTIONS 3. To remove the battery pack (D), depress battery release button (E) and remove the battery pack from your tool. Press the On/Off switch fully and the fuel gauge will light up for 2-3 seconds to show the amount of charge left in the battery.
  • Page 10 OPERATING INSTRUCTIONS BELT CLIP 1. The belt clip is attached with a small screw. Simply unscrew the clip to move it to the opposite side of the drill. DRIVER FEATURES 1. Depress the On/Off switch (C) to start and release it to stop your driver. The LED light (B) will turn on when you press the On/Off switch function which stops your chuck immediately when you quickly release the switch.
  • Page 11 OPERATING INSTRUCTIONS 3. To install the desired bit, pull the collet locking sleeve (A) forward and insert the desired bit into the sleeve as far as it will go. Then release the collet locking sleeve to secure the bit. To remove the bit, pull the collet locking sleeve forward and BATTERY DISPOSAL To preserve natural resources, please recycle or dispose of the battery pack properly.

  • Page 12: Care And Maintenance

    CARE AND MAINTENANCE parts in your power tool. NEVER use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. ALWAYS store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.

  • Page 13: Warranty

    12 V Battery 70039758 12 V Battery Charger 70039757 Belt Hook 70039679 Printed in China Bit Holder 70039692 Screw for Hook & Bit 70039680 KOBALT® and the K Design® are Holder registered trademarks of LF, LLC. All Rights Reserved. kobalttools.com...