Safety Information - Kobalt 6904 Manual

SaFetY inFOrmatiOn

KnOw the tOOL
To operate this tool, carefully read this manual and all labels affixed to the impact wrench before
using. Keep this manual available for future reference.
impOrtant
This tool should only be serviced by a qualified service technician.
reaD aLL inStrUctiOnS thOrOUGhLY
GeneraL SaFetY rULeS FOr aLL pOwer tOOLS
warninG: Some dust created by using power tools contains chemicals known to the
state of california to cause cancer and birth defects or other reproductive harm.
warninG: Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols
and the explanations that accompany them deserve your careful attention and understanding. The
safety warnings DO NOT, by themselves, eliminate any danger. They are not substitutes for proper
accident-prevention measures.
DanGer: Indicates a hazardous situation which, if not avoided, will result in death or serious
injury. This signal word is to be limited to the most extreme situations.
warninG: Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
caUtiOn: Indicates a hazardous situation which, if not avoided, will result in minor or moderate
injury.
Damage prevention and information messages
These inform the user of important information and/or instructions that could lead to equipment or
other property damage if they are not followed. Each message is preceded by the word "NOTICE,"
as in the example below:
nOtice: Equipment and/or property damage may result if these instructions are not followed.
SaVe theSe inStrUctiOnS
wOrK area
Keep your work area clean and well-lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive environments, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to lose control.
make the workshop child-proof with padlocks, master switches, or by removing starter keys.
Use the right tool. Don't force a tool or attachment to do a job for which it was not designed.
3