Usage; Preparing The Mattress For Use; Safety Information - Invacare Essential Care User Manual

4 Usage

4.1 Preparing the mattress for use

IMPORTANT!
Compress rolled mattresses must be left to
recover for a minimum of 24 hours before use.
– Open zip fully (all 3 sides) to expose upper part
of the foam, allowing to recover and aerate.
– After 24 hours replace cover ensuring the
corners of the foam are fitted to the corners
of the cover and zip up fully.
Mattresses that are delivered flat packed can be
placed directly onto bed frame and used immediately.

4.2 Safety information

1. Remove all packaging before use.
2. Place the mattress directly on the frame of the bed.
The mattress is designed for beds with adjustable lying
surface.
1587276-C
WARNING!
It is very important for the patient to reposition
themselves, or to be repositioned, on a regular
basis. This must be based on the clinical
judgement of a qualified health care professional.
This relieves pressure which helps prevent both
tissue compression and potential ulcer formation.
– Always consult a qualified health care
professional before using the product.
– Monitor the patient frequently.
CAUTION!
– Make sure that the printed side of the mattress
cover always faces upwards.
– Ensure that the distance between the surface
of the mattress and the top of the side rail is
at least 220 mm. If this is not achievable a risk
assessment must be carried out.
IMPORTANT!
If holes are present in the mattress cover,
there is a danger that liquids may ingress and
contamination may occur.
– Medical equipment including infusion pumps
and monitors should be attached to appropriate
bed accessories.
– For home use common causes of damage
include cigarette burns and the claws of pets
that puncture sheets, allowing fluid ingress and
staining.
Usage
9