Multi-Projection Connection Settings; When Using The Interactive Functions - Epson EB-1485Fi Installation Manual

Setting the Projector
f
While holding down the [ID] button, press the button with the same number as the
projector ID for the projector you want to operate
Remote control operations for the projector with the selected ID are enabled.
c

When Projector ID is set to Off, you can operate the projector using the remote control
regardless of the ID setting selected using the remote control.

When the remote control ID is set to 0, you can operate all of the projectors regardless of the
projector ID setting.

Operating multiple remote controls at the same time can cause accidental operations due to
infrared interference.

Multi-Projection Connection Settings

Make the following settings on all connected projectors. The settings differ depending on whether or not
you use the interactive functions.
 When using the interactive functions ( p.130)
 When not using the interactive functions ( p.132)

When using the interactive functions

a
Press the projector's [Menu] button
Using the Remote Control Using the Control Panel
130