Dip Switch Settings; Settings By Connection Patterns - Epson DM-D210 Technical Reference Manual

Dip Switch Settings

Use the dip switch to set the communication conditions and whether or not to perform self test when the power
is turned on.

Settings by connection patterns

Set the dip switch for each connection pattern.
Connection Pattern
USB (Self Powered/Bus Powered)
Serial (Stand-Alone)
Serial (Pass-through)
Serial (Y-type)
Serial (USB controlled)
TM Intelligent Printer (ePOS-Device)
TM-DT Series (Windows)
26
When using the followings, set the communication speed to 115200 bps.
 EPSON OPOS ADK
 EPSON OPOS ADK for .NET
 EPSON JavaPOS ADK
Match the serial communication settings for the computer and this product.
Match the serial communication settings for the computer, printer and this prod-
uct.
Match the serial communication settings for the computer, printer and this prod-
uct.
Set the communication speed to 19200 bps.
Match the serial communication settings for the TM intelligent printer's EPSON
TMNet WebConfig and this product.
Match the serial communication settings for the TM-DT Series and this product.
Settings