Epson EB-1485Fi Installation Manual page 115

Installing the Touch Unit
i
If only one projector is installed, touch (
check if ( ) is displayed in the same position
Touch all four (
Adjustment is complete when (
Go to "Calibrating the touch operation position" p.119.
j
When multiple projectors are installed, on the next projector, select Installation > Touch
Unit > Touch Unit Adjustment Guide
The following screen is displayed on the next projector.
) to confirm.
Screen
) appears in the correct position for all four (
) displayed on the screen with your finger and
Adjustment has been performed correctly if the lo‐
cation you touch with your finger is the same place
as where (
If ( ) is displayed in a different location to the
point you touched, select Up once using the control
panel or the remote control. Next, touch (
again with your finger to confirm.
Repeat until (
tion.
114
Status
) is displayed.
) is displayed in the correct posi‐
) positions.
)