Carrying Out Control Using Timer Settings - Epson V4.22 Operation Manual

Using the control functions

Carrying out control using timer settings

This is useful for carrying out certain control operations such as turning a
projector's power on and off at specified times every day or every week.
Timer settings can be carried out either for a single projector only, or all at
once for all projectors in a group.
PROCEDURE
Select "Timer" - "Timer Settings" from the "Tool"
1
menu.
The following window will be displayed and you can then
check the timer setting status.
The colours in the lines of the list have the following meanings:
: Current day's timer setting
: When some of the projectors in the group have timer setting
enabled and others have it disabled for the current day's timer
setting
: When the current day's timer setting is a disabled setting
: Timer setting for a day other than the current day
The details that can be checked and operations that can be carried out at this
time are given below.
Selects a group or projector to check the status of.
Projectors When a group is selected, the timer setting statuses for
all projectors in that group are displayed.
Shows the current day in a red box.
Days for which timer settings have been made are shown
Date in bold.
Click or
previous or next month.
Timers
Shows a list of the timer settings.
[Enabled]
Switches the timer settings that have been selected from
the timer list between enabled and disabled.
[Disabled]
[Add] Registers new timer settings.
Lets you change the timer settings that have been
selected from the timer list.
[Edit]
If a group has been selected for status checking, the
settings cannot be changed.
Lets you delete timer settings that have been selected
[Delete]
from the timer list.
to switch to the calendar for the
28