Memory Save/Recall; Error Displays - Pro-Tec Welding PRO-TEC 215 MP Operating Manual

STICK
Provides built-in STICK weld settings for the selected metal
thickness. Press Multi-Function Control (F) to select STICK.
Refer to NOTE 18 .
 Select
Welding Electrode Selection
 Select
Welding Diameter Selection
3/32'' / 1/8'' (215MP/250MP) on 120 VAC
3/32'' / 1/8'' / 5/32'' (215MP) on 208/230/240 VAC
3/32'' / 1/8'' / 5/32'' / 3/16'' (250MP) on 208/230/240 VAC
 Select metal
Thickness
HELP
Provides information of Software Version, Units of measure
selection or Factory Reset.
Press Multi-Function Control (F) to select:

VERSION
-- - Display Software Version in product.

UNITS -- -
Sets Units of measure to mm (millimeters) or
Inch in product.

FACTORY RESET -- -
Resets all welding parameters and
deletes all saved weld parameters in memory. Select
YES Restore Factory Settings
to
plete the restore.

5.4 Memory Save/Recall

Frequently used welding parameters can be saved then re-
called as needed. Memory Save/Recall can be used for MIG
SYN, MIG MAN, TIG or STICK parameters.
NOTE 19: A total of 9 memory locations are available to
save/recall welding parameters.
1. SAVE Welding Parameters to Memory
- Adjust controls to achieve a suitable weld result.
- Press (I).
© 2018 Global Welding LLC
: E60xx or 70xx
:
being welded
YES
then again to com-
Page
- Rotate (F) to select an unused Memory location.
- Press (F) to Save welding parameters.
- Press (F) again on
NO
or to cancel.
- To return to the previous screen rotate (F) to select
BACK
then press (F).
2. RECALL Welding Parameters from Memory
WELD MODE SELECTION
- From the
- Rotate (F) to select a previously saved weld parame-
ters Memory location.

5.5 ERROR Displays

Refer to description number 13 (
) or 14 (
displayed on screen
) on page 36 for additional information.
screen
Operating Manual No: PWOM-215/250MP-001
29
OPERATION
YES SAVE TO MEMORY
to confirm
screen press (I).
Over Temperature ERROR
Over Current ERROR displayed on